Affiliate Disclaimer: As an Amazon Associate I earn from qualifying purchases.

How to Dye Roller Skate Wheels?

A good set of wheels is a key ingredient to any skating recipe. And while you can find pre-made, colored sets of wheels at most sporting goods stores, sometimes it’s just more fun (and unique) to make your own. Here’s how to dye your roller skate wheels so they stand out from the rest!

Dyeing Roller Skate Wheels! 😍
  • Begin by removing the wheels from the skate
  • Next, clean the wheels with soapy water and a scrub brush to remove any dirt or debris
  • Once the wheels are clean, rinse them with clear water and allow them to dry completely
  • Now it’s time to prepare the dye
  • Mix the dye according to the package directions in a small bowl or container
  • Dip a paintbrush into the dye and apply it to the surface of the wheel, working in small sections until the entire surface is covered
  • 6 Allow the dye to dry completely before reattaching the wheels to your skates!

How to Dye Roller Skates?

No matter what color you want your roller skates to be, you can achieve it with a little bit of creativity and some basic supplies. All you need is a pair of old skates, some fabric dye, and a couple of household items. With a little bit of elbow grease, you can have a brand new pair of stylish skates in any color you want!

Here’s what you’ll need:

  • Old roller skates
  • Fabric dye (we used Rit Dye in “Navy”)
  • Rubber gloves
  • A large bucket or container for dying
  • Newspaper or plastic sheeting to protect your work surface


  • Start by removing the laces from your skates. If your skates have removable liners, take them out as well. You don’t want to accidentally dye them! Set these aside for later.
  • Next, prepare your workspace by covering it with newspaper or plastic sheeting. This will help protect against accidental spills.
  • Fill your bucket or container with enough warm water to completely submerge your skates. Add the recommended amount of fabric dye according to the package instructions.
  • Stir until the dye is completely dissolved, then carefully lower your skates into the mixture using rubber gloves (to avoid staining your hands).

Rit Dye Roller Skate Wheels

Rit Dye Roller Skate Wheels are a great way to add some personality to your skates! You can use Rit dye to create any color or design you want on your wheels, and it’s a fun way to personalize your skates. Here’s how to do it:

First, you’ll need to gather some supplies. You’ll need Rit dye, rubber gloves, a small paintbrush, and old newspapers or plastic sheeting to protect your work surface. Make sure you have plenty of ventilation in the area where you’ll be working.

Next, prepare your wheels by cleaning them with soap and water. Once they’re clean, dry them off and then place them on the newspapers or plastic sheeting. Now it’s time to start adding color!

Put on the rubber gloves and using the paintbrush, apply the Rit dye evenly over the surface of the wheel. Be sure to get into all of the nooks and crannies so that the color is evenly distributed. Once you’ve got the wheel completely covered in dye, set it aside and let it dry for at least 24 hours.

Once it’s dry, you can put your newly dyed wheels back on your skates and hit the rink!

Tie Dye Roller Skate Wheels

We all know that one of the best parts about summer is being able to enjoy some time outdoors skating around. But why not make your skating even more fun by adding some colorful tie dye to your roller skate wheels? It’s a great way to add a little personality to your skates and really stand out on the sidewalk or at the rink.

Plus, it’s a lot easier than you might think!

Here’s what you’ll need:

  • 1 bottle of white vinegar
  • 1 cup of hot water
  • A few drops of food coloring (optional)
  • Paper towels or old rags
  • Rubber gloves (optional)
  • Tie dye kit (you can find these at most craft stores)


  • Begin by mixing together the vinegar and hot water in a bowl. If you’d like, you can add a few drops of food coloring to this mixture.
  • Next, soak your paper towels or rags in this mixture until they are completely saturated. Then wring them out so that they are just damp.
  • Now it’s time to get started on the tie dyeing! Put on your rubber gloves (if using), then follow the instructions that come with your tie dye kit to create whatever design you desire.
  • Once you’re finished, set the wheels aside to dry overnight.

Painting Roller Skate Wheels

Roller skate wheels come in a variety of sizes, colors, and durometers. The size of the wheel is determined by the axle size of the skate. The most common sizes are 4-wheels (62mm), 5-wheels (72mm), and 6-wheels (84mm).

The color of the wheel generally corresponds to the hardness of the urethane; softer urethanes are typically clear or light colored, while harder urethanes can be any color. Black is the most popular color for all types of skating. The durometer is a measure of hardness on a scale from 1-100, with 100 being the hardest.

For roller skating, wheels typically range from 85A (very soft) to 101A (very hard). Softer wheels grip the pavement better and provide a smoother ride, but they wear down faster and are more susceptible to flat spot sting. Harder wheels slide easier for tricks and slides, but they don’t grip as well on turns and can be uncomfortable on rougher surfaces.

Most skaters will have a variety of durometers to choose from depending on their skating style. Indoor vs Outdoor Wheels One final consideration when choosing roller skate wheels is whether you’ll be skating indoors or outdoors.

Indoor wheels are usually smaller (62mm or less) and harder (95A or higher) to allow for quick starts and stops on smooth surfaces like wood or polished concrete.

How to Dye Urethane Wheels?

Urethane wheels are a great option for those who want to add a unique touch to their ride. While most urethane wheels come in black, there are ways to change the color of your urethane wheels to match the look of your car or truck.

Here is a step-by-step guide on how to dye urethane wheels:

  1. Begin by cleaning the urethane wheel with soap and water. This will remove any dirt or grime that could prevent the dye from properly adhering to the wheel.
  2. Next, sand down the surface of the wheel using fine-grit sandpaper. This will help create a textured surface for the dye to grip onto.
  3. Once the wheel is sanded, wipe it down with a clean cloth dampened with rubbing alcohol. This will remove any dust created by sanding.
  4. Now it’s time to apply the dye! Use a paintbrush or foam applicator to evenly apply the dye over the entire surface of the wheel. Make sure not to miss any spots!
  5. Allow the dyed wheel to dry completely before moving on to step six (this usually takes about 24 hours). 6Now that your wheel is dry, it’s time for a clear coat!

How to Dye Roller Skate Wheels


How Do You Dye Skate Wheels?

Skate wheels can be dyed a variety of colors to match the skater’s preference. The most common method is to use a sharpie or other permanent marker. Simply remove the wheel from the skate, color in the desired area, and allow it to dry.

Some skaters also like to add patterns or designs to their wheels for additional personalization.

Can You Paint Your Roller Skate Wheels?

Yes, you can paint your roller skate wheels. You will need to purchase special paint that is made for painting roller skate wheels. This type of paint is usually available at sporting goods stores or online.

Be sure to follow the directions on the paint can carefully.

Can You Dye Black Roller Skate Wheels?

Yes, you can dye black roller skate wheels. You will need to purchase a wheel dye kit, which can be found at most sporting goods stores. The kits usually come with instructions on how to properly prepare the wheels for dying.

Can You Dye Skateboard Wheels With Food Coloring?

Yes, it is possible to dye skateboard wheels with food coloring. This can be done by adding a few drops of food coloring to the desired area of the wheel and then spinning the wheel until the color is evenly distributed. Once the color is evenly distributed, allow the wheel to dry completely before riding.


Roller skating is a fun activity that can be enjoyed by people of all ages. If you’re looking to add a little bit of personality to your skating experience, consider dyeing your roller skate wheels. This can be a fun and easy project that will allow you to customize your skates and make them truly unique.

To get started, you’ll need to purchase some water-based wheel paint in the color or colors of your choice. You’ll also need some rubber gloves and a couple of old rags. Once you have everything gathered, simply remove the wheels from your skates and set them on a piece of cardboard or newspaper.

Apply the paint to the wheels using a sponge or brush, being sure to cover them evenly. Allow the paint to dry completely before reattaching the wheels to your skates. And that’s it!

Now you have one-of-a-kind roller skates that are sure to turn heads when you’re out cruising around town.


Leave a Comment